.png){kind=logo}
Articles by keywords "wall"
Influence of climatic factors on thermal performance of wall panels
- Year: 2024
- Issue: 4
- 35
- 780
- Pages: 11303-11303
Basal heave stability assessment of retaining structures in cramped construction conditions: A calculation method
- Year: 2023
- Issue: 1
- 51
- 1517
- Pages: 10603-10603
Condition Load Effect Factor of Profile Steel in Lightweight Steel Concrete Wall Panels
- Year: 2023
- Issue: 1
- 79
- 1609
- Pages: 10602-10602
Verification of the numerical model for the convective jet flow near the side hood
- Year: 2022
- Issue: 7
- 18
- 1277
- Pages: 10510-10510
Free vibrations of a viscoelastic isotropic plate with a negative Poisson's ratio
- Year: 2022
- Issue: 7
- 59
- 1652
- Pages: 10502-10502
Conjugate Approximation of Thin-Walled Rods Internal Forces Functions in Bending Torsion
- Year: 2022
- Issue: 5
- 55
- 1527
- Pages: 10304-10304
Stress State of Г-Shaped Thin-Walled Rod Joints in Bending Torsion
- Year: 2022
- Issue: 1
- 66
- 2140
- Pages: 9903-9903
Combination of rockfill dam reinforced concrete face and seepage control wall in the foundation: stress-strain state
- Year: 2022
- Issue: 1
- 63
- 2758
- Pages: 9902-9902
Base’s structure of Prefabricated Sanitary Module: erection and life stages
- Year: 2021
- Issue: 5
- 67
- 2252
- Pages: 9803-9803
Actual thermal insulation properties of cellular autoclave curing concretes
- Year: 2018
- Issue: 5
- 56
- 3415
- Pages: 75-104
Qualitative assessment of the cost of repair of historical buildings using automated monitoring systems
- Year: 2019
- Issue: 2
- 84
- 3169
- Pages: 7-22
Operational humidity of autoclaved aerated concrete in outer walls
- Year: 2018
- Issue: 8
- 81
- 3574
- Pages: 22-40
Stress-strain state of brick facing in interface with floor slabs in absence of an expansion joint
- Year: 2018
- Issue: 8
- 65
- 2759
- Pages: 13-21
Influence of nodal connection stiffness on the mechanical characteristics of the rack
- Year: 2018
- Issue: 8
- 27
- 2949
- Pages: 1-12
Designed thermophysical parameters of walls made of autoclaved aerated concrete blocks
- Year: 2018
- Issue: 6
- 55
- 3396
- Pages: 35-58
Thermophysical quality of outer walls made of autoclaved aerated concrete blocks
- Year: 2018
- Issue: 7
- 61
- 3240
- Pages: 1-21
Mechanisms for the formation of vertical cracks in the corner zones at the intersection of the exposed walls
- Year: 2015
- Issue: 9
- 26
- 2906
- Pages: 33-43
Humidity conditions of a extermal envelops with facing by a silicate brick
- Year: 2015
- Issue: 6
- 17
- 2619
- Pages: 74-86
Characteristics of modern types of panels in low-rise building
- Year: 2015
- Issue: 6
- 11
- 2814
- Pages: 62-73
Evaluation of Hygrothermal Performance of Multilayered Wall Design in Annual Cycle
- Year: 2015
- Issue: 6
- 49
- 3503
- Pages: 19-33
"Performance-based" seismic methodology and its application in seismic design of reinforced concrete structures
- Year: 2015
- Issue: 5
- 17
- 2567
- Pages: 75-83
Seismic shear design of twenty-story RC building with ductile wall system
- Year: 2015
- Issue: 5
- 22
- 2698
- Pages: 63-74
Provision of resistibility of reinforced concrete structuresof "zero cycle" assuming possibility of cracking
- Year: 2015
- Issue: 4
- 20
- 2619
- Pages: 82-93
Reasons of destruction brickwork of exterior walls technical floor
- Year: 2014
- Issue: 12
- 20
- 2968
- Pages: 112-122
Acoustic performance residential buildings(for example Macedonia)
- Year: 2014
- Issue: 6
- 8
- 2447
- Pages: 7-16
The defects of protective facing masonry of frame buildings
- Year: 2014
- Issue: 5
- 14
- 2670
- Pages: 28-38
Local buckling of steel cold-formed profiles under transverse bending
- Year: 2014
- Issue: 4
- 24
- 2705
- Pages: 109-127
The index calculation of airborne sound insulation walls of the blocks
- Year: 2012
- Issue: 4
- 9
- 2597
- Pages: 41-49
Method of calculating the payback period of investment for renovation of building facades
- Year: 2014
- Issue: 2
- 83
- 3467
- Pages: 82-106
The quickly erected buildings of lightweight nanomodified concrete
- Year: 2014
- Issue: 1
- 11
- 2877
- Pages: 61-71
The stress-strain state of frame constructions’ elements from thin-walled cores
- Year: 2013
- Issue: 7
- 65
- 3159
- Pages: 79-123
Static calculation of option of Mainskaya hydroelectric power station’s labyrinth spillway with use of the SOFiSTiK software
- Year: 2013
- Issue: 6
- 12
- 3058
- Pages: 14-19
International association of light-gauge steel construction
- Year: 2012
- Issue: 2
- 41
- 2835
- Pages: 27-30
Masonry units with high percentage of holes in a facing laying of external walls
- Year: 2016
- Issue: 11
- 17
- 2739
- Pages: 22-36
Corrosion of the steel thin-walled profiles in the enclosure structures
- Year: 2016
- Issue: 5
- 20
- 2700
- Pages: 7-18
Protective properties of anticorrosive coatings of steel thin-walled profiles for walling
- Year: 2017
- Issue: 3
- 12
- 2601
- Pages: 71-79
Strongly reinforced concreting design of cast concrete alloy mixtures
- Year: 2017
- Issue: 2
- 15
- 3558
- Pages: 29-41
Masonry units with high percentage of holes in a facing laying of external walls (as a scientific discussion)
- Year: 2017
- Issue: 1
- 30
- 3212
- Pages: 86-92
Simulation modeling of winter concreting of wall construction
- Year: 2017
- Issue: 7
- 28
- 2923
- Pages: 18-31
Reconstruction of Pitched Roofs Using Steel Thin-walled Structures
- Year: 2017
- Issue: 12
- 36
- 2839
- Pages: 20-48
Evaluation of seismic analysis in diverse effect position of shear wall for reinforced concrete frame building
- Year: 2017
- Issue: 11
- 26
- 2659
- Pages: 7-14
The impact of the extent of mortar filling of brick holes on thermal conductivity of masonry
- Year: 2018
- Issue: 4
- 228
- 4908
- Pages: 32-51