.png){kind=logo}
Articles by keywords "Model"
Bearing capacity of bonded connection in facade structures with vertically bonded cladding
- Year: 2026
- Issue: 2
- 11
- 67
- Pages: 12203-12203
Cyber-physical modeling and prediction of self-healing processes dynamics in bioconcrete
- Year: 2025
- Issue: 5
- 33
- 1016
- Pages: 11902-11902
Stress-strain state of the Tribo-Fatigue shaft-insert system under combined loading
- Year: 2025
- Issue: 4
- 34
- 1251
- Pages: 11803-11803
Thermal irregularity of connection joints in modular and block-modular enclosing structures
- Year: 2025
- Issue: 4
- 48
- 2364
- Pages: 11807-11807
Assessment of the stress-strain state of a prestressed steel-concrete beam
- Year: 2025
- Issue: 2
- 25
- 2570
- Pages: 11605-11605
Multifractal modeling for quality control and mechanical property assessment of fiberglass pipes
- Year: 2024
- Issue: 4
- 21
- 2075
- Pages: 11317-11317
Modeling of viscoelastic response in epoxy fiberglass plastic under cyclic high temperature and load
- Year: 2024
- Issue: 4
- 44
- 2461
- Pages: 11313-11313
Thermomechanical behavior of polymer composites and its calculation with finite element modeling
- Year: 2024
- Issue: 4
- 26
- 2283
- Pages: 11312-11312
Crash modeling of bridge railings: Impact of post spacing on performance
- Year: 2024
- Issue: 3
- 40
- 2447
- Pages: 11205-11205
Stress strain state of asphalt concrete pavements of steel bridges
- Year: 2023
- Issue: 4
- 38
- 2764
- Pages: 10924-10924
Combined behavior of the hinged facade system and reinforced concrete frame of the building under seismic impact
- Year: 2023
- Issue: 4
- 159
- 3479
- Pages: 10901-10901
Influence of wind load on connection system of temporary towers
- Year: 2023
- Issue: 2
- 63
- 3286
- Pages: 10701-10701
Translucent elements as structural part of facade systems
- Year: 2023
- Issue: 1
- 37
- 3276
- Pages: 10607-10607
Verification of the numerical model for the convective jet flow near the side hood
- Year: 2022
- Issue: 7
- 18
- 2930
- Pages: 10510-10510
Aerodynamic external pressure coefficients for rectangular buildings
- Year: 2022
- Issue: 4
- 73
- 3760
- Pages: 10201-10201
Renovation of the "Hydro Tower with Laboratories" building at the Polytechnic University adapt for the museum
- Year: 2022
- Issue: 3
- 46
- 4140
- Pages: 10104-10104
Modeling of the Stress-Strain State of Steel Tank with Geometric Imperfections
- Year: 2022
- Issue: 2
- 67
- 3865
- Pages: 10001-10001
Impact of Foundation Stiffness on Stress-Strain State of Concrete Faced Rockfill Dam
- Year: 2021
- Issue: 3
- 29
- 5699
- Pages: 9604-9604
Algorithm for Selecting a Concrete Pump in the Construction of High-Rise Buildings
- Year: 2021
- Issue: 2
- 48
- 4575
- Pages: 9503-9503
Simulation of Concrete Plate Perforation by Coupled Finite Element and Smooth Particle Hydrodynamics Methods
- Year: 2020
- Issue: 7
- 120
- 4846
- Pages: 9207-9207
Modeling the Filtration of Groundwater In Multilayer Porous Media
- Year: 2020
- Issue: 7
- 37
- 4296
- Pages: 9206-9206
The Stress-Strain State of a Metal Cracked Plate with the Various Types of the Deformation Curve
- Year: 2020
- Issue: 7
- 40
- 4564
- Pages: 9205-9205
Strength and deformability of compressed-bent masonry structures during and after fire
- Year: 2020
- Issue: 7
- 56
- 4601
- Pages: 9203-9203
Layer model of the cement composites deformation in the reinforced masonry structures
- Year: 2020
- Issue: 7
- 75
- 4287
- Pages: 9202-9202
Minimizing Earthwork Volumes by Optimizing Vertical Alignment with Linear Programming Algorithm
- Year: 2019
- Issue: 7
- 12
- 4375
- Pages: 7-13
Calibration and Validation of the Menetrey-Willam Constitutive Model for Concrete
- Year: 2020
- Issue: 3
- 345
- 5702
- Pages: 8804-8804
The history and development of the classification system for the construction industry
- Year: 2020
- Issue: 1
- 147
- 5461
- Pages: 20-29
Implementation of the «Form-Finding» method in the Rhinoceros software package
- Year: 2019
- Issue: 5
- 26
- 4514
- Pages: 14-21
Reduction of water saturated clayey soils’ deflections by reinforcement
- Year: 2019
- Issue: 9
- 125
- 4774
- Pages: 22-33
Modeling of filtration flows under hydraulic engineering structures
- Year: 2018
- Issue: 12
- 37
- 5115
- Pages: 14-24
Determination of the cost of insulation on their thermophysical characteristics
- Year: 2019
- Issue: 1
- 67
- 5125
- Pages: 19-29
Effect of complex organo-mineral additive on the deformation of hydrotechnical concrete
- Year: 2019
- Issue: 4
- 78
- 5763
- Pages: 7-19
Automated masonry method with evaluation of its productivity and quality characteristics
- Year: 2019
- Issue: 3
- 130
- 4454
- Pages: 7-22
Fire resistance numerical modeling on the example of metal structures
- Year: 2015
- Issue: 8
- 10
- 4222
- Pages: 36-47
One approach for extrapolation of rock mass parameters in tunneling
- Year: 2015
- Issue: 5
- 9
- 4321
- Pages: 150-158
Logistic model for the importation of a tropical timber from South America
- Year: 2015
- Issue: 2
- 4
- 4122
- Pages: 87-97
Simulation of the temperature field in the sand-lime brick during warm-blank
- Year: 2014
- Issue: 5
- 7
- 4223
- Pages: 65-70
Thermal analysis of laminated composite and sandwich plate using layer wise finite element
- Year: 2014
- Issue: 5
- 11
- 4358
- Pages: 7-14
Complex of virtual labs for students of “Civil Engineering” educational program
- Year: 2014
- Issue: 1
- 18
- 4220
- Pages: 4-22
Effective way of creation of microcracks wave impact on layer
- Year: 2013
- Issue: 10
- 7
- 4589
- Pages: 25-39
Modeling of thermal processes with use of iron and steel wastes in the production of silica brick
- Year: 2013
- Issue: 8
- 7
- 4271
- Pages: 29-33
Current state of the calculation of reinforced structures that are exposed to aggressive medium
- Year: 2012
- Issue: 2
- 19
- 4067
- Pages: 46-60
Foschi’s method of strain calculation of the metal plate connectors compared to program complex APM Wood
- Year: 2016
- Issue: 8
- 143
- 5349
- Pages: 31-46
Evaluation of stress-deformed state of the foundation slab to karst sinkholes in SCAD Office
- Year: 2016
- Issue: 4
- 29
- 4907
- Pages: 18-33
Soil model implemented in the software packages SCAD Office and Plaxis 3D
- Year: 2016
- Issue: 3
- 174
- 5197
- Pages: 31-60
Monitoring of the construction site using an information model
- Year: 2017
- Issue: 12
- 38
- 4478
- Pages: 7-19
Effectiveness of jet grouting method for soil base strengthening
- Year: 2017
- Issue: 5
- 39
- 4464
- Pages: 56-63
Effective models of public-private partnership in municipal facilities
- Year: 2017
- Issue: 2
- 9
- 4222
- Pages: 78-86
Advantages of using and difficulties in implementing of building information modeling
- Year: 2017
- Issue: 8
- 98
- 4935
- Pages: 41-62
Monitoring and quality assessment of urban development areas based on neural network modeling and GIS
- Year: 2017
- Issue: 11
- 24
- 4115
- Pages: 47-59
Finite element modeling of fiber reinforced concrete members under biaxial bending
- Year: 2017
- Issue: 10
- 25
- 5224
- Pages: 30-41
Collisions of general utilities designing through the use of BIM-platforms
- Year: 2018
- Issue: 3
- 44
- 5190
- Pages: 19-29
The form of a monoclinic wave propagating along an initially dry riverbed
- Year: 2018
- Issue: 1
- 9
- 5007
- Pages: 7-19
Accounting of the soil rheological properties in the building settlement calculation
- Year: 2012
- Issue: 1
- 45
- 4551
- Pages: 1-21