.png){kind=logo}
Articles by keywords "structures"
Bearing capacity of bonded connection in facade structures with vertically bonded cladding
- Year: 2026
- Issue: 2
- 21
- 206
- Pages: 12203-12203
Thermal irregularity of connection joints in modular enclosing structures
- Year: 2025
- Issue: 5
- 33
- 979
- Pages: 11907-11907
Load-carrying capacity of a composite architectural cornice with built-in water drainage
- Year: 2025
- Issue: 4
- 18
- 1155
- Pages: 11805-11805
Gel-filled structures: The influence of frame size on fire resistance
- Year: 2025
- Issue: 3
- 46
- 2348
- Pages: 11704-11704
Construction materials using auxetics for building protected structures
- Year: 2025
- Issue: 3
- 68
- 2511
- Pages: 11703-11703
Thermal irregularity of connection joints in modular and block-modular enclosing structures
- Year: 2025
- Issue: 4
- 49
- 2460
- Pages: 11807-11807
Assessment of the stress-strain state of a prestressed steel-concrete beam
- Year: 2025
- Issue: 2
- 25
- 2664
- Pages: 11605-11605
Reinforcement of end-plate connections under low cyclic loading
- Year: 2025
- Issue: 2
- 64
- 2958
- Pages: 11603-11603
Anchor bonds of the contact joint of steel-concrete structures
- Year: 2025
- Issue: 1
- 47
- 3384
- Pages: 11504-11504
Mechanical safety of buildings and structures during underground construction of linear objects in complex geotechnical conditions
- Year: 2025
- Issue: 1
- 64
- 3562
- Pages: 11503-11503
Influence of climatic factors on thermal performance of wall panels
- Year: 2024
- Issue: 4
- 45
- 2706
- Pages: 11303-11303
Strengthening of concrete beams by CFRP considering initial state
- Year: 2023
- Issue: 4
- 41
- 3222
- Pages: 10929-10929
Stability of spatial structural elements: the influence of actual modeling
- Year: 2023
- Issue: 4
- 42
- 3210
- Pages: 10917-10917
Constructions with the use of monolithic foam concrete in fixed formwork
- Year: 2023
- Issue: 4
- 49
- 3169
- Pages: 10915-10915
External Reinforcement of Wooden Beam Structures with Carbon Fiber Composite Materials
- Year: 2023
- Issue: 4
- 53
- 3331
- Pages: 10911-10911
Numerical methods in assessing the reliability of spatial metal structures with a high level of responsibility
- Year: 2023
- Issue: 1
- 40
- 3531
- Pages: 10605-10605
Basal heave stability assessment of retaining structures in cramped construction conditions: A calculation method
- Year: 2023
- Issue: 1
- 54
- 3534
- Pages: 10603-10603
Condition Load Effect Factor of Profile Steel in Lightweight Steel Concrete Wall Panels
- Year: 2023
- Issue: 1
- 83
- 3814
- Pages: 10602-10602
Conjugate Approximation of Thin-Walled Rods Internal Forces Functions in Bending Torsion
- Year: 2022
- Issue: 5
- 55
- 3517
- Pages: 10304-10304
Stress State of Г-Shaped Thin-Walled Rod Joints in Bending Torsion
- Year: 2022
- Issue: 1
- 69
- 4472
- Pages: 9903-9903
Fire resistance of statically indeterminate steel systems
- Year: 2022
- Issue: 1
- 81
- 4505
- Pages: 9901-9901
Strength and deformability of compressed-bent masonry structures during and after fire
- Year: 2020
- Issue: 7
- 56
- 4683
- Pages: 9203-9203
Bearing Capacity of Reinforced Concrete T-beams with a Steel Profile
- Year: 2020
- Issue: 4
- 73
- 4872
- Pages: 8904-8904
Facade Systems Modal Analysis in Consideration its Own Dynamic Characteristics of the Frame
- Year: 2020
- Issue: 4
- 46
- 4698
- Pages: 8906-8906
Condition Load Effect Factor of Profile Steel in Lightweight Steel Concrete Structures
- Year: 2020
- Issue: 4
- 54
- 4679
- Pages: 8907-8907
Fuzzy logic – based expert system for assessment of existing concrete structures
- Year: 2019
- Issue: 6
- 59
- 3830
- Pages: 7-17
Damage identification using the moving fractal method for automated monitoring
- Year: 2018
- Issue: 5
- 33
- 4538
- Pages: 52-61
Modeling of filtration flows under hydraulic engineering structures
- Year: 2018
- Issue: 12
- 37
- 5211
- Pages: 14-24
Determination of the cost of insulation on their thermophysical characteristics
- Year: 2019
- Issue: 1
- 67
- 5215
- Pages: 19-29
Fire resistance numerical modeling on the example of metal structures
- Year: 2015
- Issue: 8
- 10
- 4306
- Pages: 36-47
Testing Station of Overhead Transmission Power Lines Supports & Tower Structures at DonNACEA
- Year: 2015
- Issue: 7
- 25
- 4730
- Pages: 85-98
Humidity conditions of a extermal envelops with facing by a silicate brick
- Year: 2015
- Issue: 6
- 18
- 4408
- Pages: 74-86
Translucent structures and methods to increase their energy efficiency
- Year: 2015
- Issue: 5
- 50
- 4554
- Pages: 112-128
Strenghtening studies of composite construction at the direct compression
- Year: 2015
- Issue: 5
- 29
- 4529
- Pages: 29-38
Provision of resistibility of reinforced concrete structuresof "zero cycle" assuming possibility of cracking
- Year: 2015
- Issue: 4
- 20
- 4307
- Pages: 82-93
The impact of the reduction factor of wind force coefficient to lattice structures
- Year: 2015
- Issue: 4
- 28
- 4900
- Pages: 45-57
Pulsation effects of wind to the antenna mast structures in software SCAD Office
- Year: 2015
- Issue: 3
- 16
- 4484
- Pages: 81-97
History, evolution and development of regulatory requirements for enclosing structures
- Year: 2015
- Issue: 3
- 131
- 5535
- Pages: 7-37
Comparison of initial and calibrated values of pulsed inductive method
- Year: 2014
- Issue: 11
- 7
- 4258
- Pages: 7-17
Using of approximating surfaces for the executive surveys of building constructions
- Year: 2014
- Issue: 10
- 10
- 4539
- Pages: 50-59
Comparison of SCAD Office and LIRA-SAPR on the example of calculation of communications tower
- Year: 2014
- Issue: 10
- 61
- 5902
- Pages: 7-21
The standardized farm designs with 10% slope for 24, 30, 36 meters span
- Year: 2014
- Issue: 7
- 24
- 4615
- Pages: 92-106
Reinforcement of brick masonry with composite materials and screw-in anchors
- Year: 2014
- Issue: 6
- 24
- 4873
- Pages: 17-31
Maintenance of thermal cracking resistance in massive concrete base slabs during winter concreting
- Year: 2014
- Issue: 2
- 25
- 4422
- Pages: 125-135
Experience of design and construction of energy effective buildings in Volgograd
- Year: 2013
- Issue: 9
- 10
- 4428
- Pages: 21-33
Current state of the calculation of reinforced structures that are exposed to aggressive medium
- Year: 2012
- Issue: 2
- 19
- 4162
- Pages: 46-60
Quality control of the reinforced concrete structures when inspecting buildings
- Year: 2013
- Issue: 2
- 19
- 4513
- Pages: 62-70
Durability of galvanized steel framing in residential buildings
- Year: 2013
- Issue: 1
- 21
- 4480
- Pages: 11-17
Frame buildings construction using monolithic foamed concrete
- Year: 2015
- Issue: 1
- 23
- 4909
- Pages: 74-90
Load-carrying ability of adhesive joints in suspended facade constructions
- Year: 2018
- Issue: 5
- 34
- 4874
- Pages: 1-14
Masonry units with high percentage of holes in a facing laying of external walls
- Year: 2016
- Issue: 11
- 17
- 4596
- Pages: 22-36
The review of the existing standards of pricing on technical inspection of buildings and structures
- Year: 2016
- Issue: 5
- 5
- 3902
- Pages: 72-89
The cost calculation of inspection buildings and structures on engineering man-hours
- Year: 2016
- Issue: 5
- 15
- 4158
- Pages: 58-71
Assessment of straw construction technologies in terms of thermal efficiency of enclosing structures
- Year: 2016
- Issue: 4
- 15
- 4411
- Pages: 103-116
Strongly reinforced concreting design of cast concrete alloy mixtures
- Year: 2017
- Issue: 2
- 16
- 5672
- Pages: 29-41
Masonry units with high percentage of holes in a facing laying of external walls (as a scientific discussion)
- Year: 2017
- Issue: 1
- 30
- 5186
- Pages: 86-92
Reconstruction of Pitched Roofs Using Steel Thin-walled Structures
- Year: 2017
- Issue: 12
- 38
- 4733
- Pages: 20-48
Influence of placement of the window block on wall thickness on heat losses
- Year: 2018
- Issue: 4
- 23
- 4488
- Pages: 62-71