Latest issues
Vatin, Nikolai Ivanovich
  • Position
    Professor
  • Affiliation
    Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russian Federation
  • Degree
    Doctor of Technical Sciences
  • St. Petersburg, Russian Federation
  • Biography
  • Publications

Thematic areas:

  • Soils and foundations, underground structures;
  • Structural mechanics;
  • Building constructions, buildings and structures;
  • Building products and construction materials;
  • Energy efficiency and thermal protection of buildings.

Introduction of double-skin facades in the Russian Federation

  • Year: 2019
  • Issue: 9
  • 58
  • 2221
  • Pages: 51-62

Operational humidity of autoclaved aerated concrete in outer walls

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2018
  • Issue: 8
  • 72
  • 2784
  • Pages: 22-40

Crack-resistance of the reinforced concrete wall under conditions of temperature deformation constrained by the foundation

Building Materials
  • Year: 2018
  • Issue: 8
  • 34
  • 2269
  • Pages: 51-62

Thermophysical quality of outer walls made of autoclaved aerated concrete blocks

Monitoring and testing of buildings and structures
  • Year: 2018
  • Issue: 7
  • 54
  • 2516
  • Pages: 1-21

Precast-monolithic reinforced concrete beam-slabs technology with claydit blocks

  • Year: 2018
  • Issue: 7
  • 52
  • 2523
  • Pages: 43-59

Designed thermophysical parameters of walls made of autoclaved aerated concrete blocks

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2018
  • Issue: 6
  • 50
  • 2659
  • Pages: 35-58

Actual thermal insulation properties of cellular autoclave curing concretes

Building Materials
  • Year: 2018
  • Issue: 5
  • 45
  • 2659
  • Pages: 75-104

The teaching a subject of professional cycle with a duplication in a foreign language as a method of preparation of specialists of international level (on an example, the training of an engineer-builder)

  • Year: 2017
  • Issue: 5
  • 6
  • 2035
  • Pages: 7-16

Structured steel plates

Building Materials
  • Year: 2017
  • Issue: 3
  • 11
  • 2387
  • Pages: 35-46

The method and computation of air change required for attic rooms

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2017
  • Issue: 2
  • 50
  • 3240
  • Pages: 50-60

3D printing in construction

Technology and organization of construction
  • Year: 2017
  • Issue: 1
  • 89
  • 2642
  • Pages: 27-46

Masonry units with high percentage of holes in a facing laying of external walls (as a scientific discussion)

Building Materials
  • Year: 2017
  • Issue: 1
  • 27
  • 2426
  • Pages: 86-92

Heat and power characteristics analysis carried out for the residential building made of autoclaved aerated concrete blocks

Monitoring and testing of buildings and structures
  • Year: 2016
  • Issue: 12
  • 40
  • 2744
  • Pages: 45-60

Manufacturability of the construction processes in trench excavations with automatic control systems

Technology and organization of construction
  • Year: 2016
  • Issue: 9
  • 7
  • 2130
  • Pages: 26-33

Assessment of moisture conditions of walls with façade’s thermoinsulation composite systems with external mortar layers

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2016
  • Issue: 6
  • 39
  • 2575
  • Pages: 34-54

Air mode of a tripple wall

Building constructions, buildings and structures
  • Year: 2016
  • Issue: 6
  • 34
  • 2625
  • Pages: 102-114

The kinetics of curing of concrete at an early freeze

Building Materials
  • Year: 2016
  • Issue: 2
  • 9
  • 2072
  • Pages: 7-17

Feasibility study for renovation of facades heat insulation of residential buildings of the first mass series

Energy efficiency and thermal protection of buildings
  • Year: 2016
  • Issue: 1
  • 44
  • 2858
  • Pages: 20-31

The consumer properties of wall products from AAC

Building Materials
  • Year: 2016
  • Issue: 1
  • 57
  • 2743
  • Pages: 78-101

Acceleration of the formation process of the structure of cement stone with the use of carbonnanomodified additives

Building Materials
  • Year: 2015
  • Issue: 7
  • 12
  • 2179
  • Pages: 32-40

Evaluation of Hygrothermal Performance of Multilayered Wall Design in Annual Cycle

Monitoring and testing of buildings and structures
  • Year: 2015
  • Issue: 6
  • 44
  • 2719
  • Pages: 19-33

Analysis of stress in frame nodes of a single-storey steel framework in high seismic loads conditions with the use of SCAD software

Structural mechanics
  • Year: 2015
  • Issue: 2
  • 16
  • 2076
  • Pages: 34-44

Frame buildings construction using monolithic foamed concrete

Building constructions, buildings and structures
  • Year: 2015
  • Issue: 1
  • 20
  • 2153
  • Pages: 74-90

Technical and economic assessment on actions for heat insulation of external envelops external walls of apartment building with the double-skin facade

Energy efficiency and thermal protection of buildings
  • Year: 2014
  • Issue: 11
  • 49
  • 2720
  • Pages: 70-84

New gypsum-based plaster mortar by UNIS

Building Materials
  • Year: 2014
  • Issue: 10
  • 7
  • 2199
  • Pages: 37-49

Experimental comparison of the characteristics of water vapor permeability of the main construction materials

Building Materials
  • Year: 2014
  • Issue: 10
  • 13
  • 2023
  • Pages: 98-108

The quality of the visual inspection of buildings and structures, and the method of its execution

Monitoring and testing of buildings and structures
  • Year: 2014
  • Issue: 10
  • 25
  • 2200
  • Pages: 134-146

Energy audit of kindergartens to improve energy efficiency

Energy efficiency and thermal protection of buildings
  • Year: 2014
  • Issue: 9
  • 16
  • 2168
  • Pages: 71-83

The Program "5-100-2020": attracting foreign students to study civil engineering in the St.Petersburg Polytechnical University

Technology and organization of construction
  • Year: 2014
  • Issue: 8
  • 4
  • 1967
  • Pages: 21-35

Technical and economic assessment on actions for heat insulation of external envelops of an individual house

Energy efficiency and thermal protection of buildings
  • Year: 2014
  • Issue: 8
  • 32
  • 2678
  • Pages: 93-115

About the making Regional Methodical Document “Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg” (RMD 40-20-2013 Saint-Petersburg)

Water supply, sewerage, construction systems of water resources protection
  • Year: 2014
  • Issue: 1
  • 11
  • 2326
  • Pages: 48-60

Buckling analysis of thin-walled cold-formed beams — short review

Structural mechanics
  • Year: 2014
  • Issue: 6
  • 28
  • 2220
  • Pages: 32-57

Method of calculating the payback period of investment for renovation of building facades

Energy efficiency and thermal protection of buildings
  • Year: 2014
  • Issue: 2
  • 80
  • 2813
  • Pages: 82-106

QS criteriaas a basis for evaluation of the Institute of Civil Engineering of the Saint-Petersburg State Polytechnical University

Technology and organization of construction
  • Year: 2014
  • Issue: 2
  • 4
  • 2051
  • Pages: 5-24

The influence of the airproof composition on the thermo technical characteristics of the enclosing structures

Energy efficiency and thermal protection of buildings
  • Year: 2014
  • Issue: 4
  • 10
  • 2071
  • Pages: 83-95

The innovative technology for erection of wall constructions of autoclaved aerated concrete blocks on polyurethane adhesive

Building constructions, buildings and structures
  • Year: 2013
  • Issue: 8
  • 41
  • 2532
  • Pages: 20-28

“Battle of technologies” at 17th International building Exhibition BalticBuild

Technology and organization of construction
  • Year: 2013
  • Issue: 7
  • 7
  • 2070
  • Pages: 1-4

The energy saving formula

Energy efficiency and thermal protection of buildings
  • Year: 2013
  • Issue: 7
  • 77
  • 3240
  • Pages: 49-63

Assessment techniques of earthwork production’s efficiency

Technology and organization of construction
  • Year: 2013
  • Issue: 7
  • 7
  • 2057
  • Pages: 64-70

Implantation of RMD 41-11-2012 Saint-Petersburg “Organization of heating systems in Saint-Petersburg”

Heat supply, ventilation, air conditioning, gas supply and lighting
  • Year: 2013
  • Issue: 1
  • 13
  • 2210
  • Pages: 47-54

Russian scientific journals in construction

Technology and organization of construction
  • Year: 2013
  • Issue: 2
  • 7
  • 2788
  • Pages: 1-20

Energy efficiency of envelopes at major repairs

Energy efficiency and thermal protection of buildings
  • Year: 2013
  • Issue: 3
  • 67
  • 2639
  • Pages: 1-11

Efficiency of use of systems of automatic control of AccuGrade in construction

Technology and organization of construction
  • Year: 2013
  • Issue: 4
  • 9
  • 2224
  • Pages: 29-35

International Polytechnical Summer School “Civil Engineering and Design” in SPbSPU

  • Year: 2012
  • Issue: 5
  • 7
  • 2104
  • Pages: 1-5

Long span footway bridges: coldformed steel cross-section

Building constructions, buildings and structures
  • Year: 2012
  • Issue: 1
  • 36
  • 2397
  • Pages: 47-53

Fundamental and polytechnical experience of construction education with using Moodle

  • Year: 2012
  • Issue: 2
  • 6
  • 2297
  • Pages: 6-17

International relations in construction education and science

  • Year: 2012
  • Issue: 2
  • 19
  • 2452
  • Pages: 1-5

Increase of power efficiency of buildings of kindergartens

Energy efficiency and thermal protection of buildings
  • Year: 2012
  • Issue: 3
  • 17
  • 2231
  • Pages: 52-76

Footway bridges: cold formed steel cross-section

Engineering and construction of roads, subways, airfields, bridges and transport tunnels
  • Year: 2012
  • Issue: 3
  • 24
  • 2262
  • Pages: 39-51

Climate change and the thermal island effect in the million-plus city

Energy efficiency and thermal protection of buildings
  • Year: 2020
  • Issue: 4
  • 447
  • 4141
  • Pages: 8902-8902

FRP helical micro screw pile with cast iron pile cap: Review

Grounds and foundations, underground structures
  • Year: 2020
  • Issue: 4
  • 70
  • 2428
  • Pages: 8903-8903

ALBUM OF TECHNICAL SOLUTIONS FOR THE APPLICATION OF HEAT INSULATING PRODUCTS FROM POLYURETHANE FOAM TRADEMARK "SPU-INSULATION" IN THE CONSTRUCTION OF RESIDENTIAL, PUBLIC AND INDUSTRIAL BUILDINGS

Building Materials
  • Year: 2013
  • Issue: 3
  • 32
  • 2543
  • Pages: 68-331

ALBUM OF TECHNICAL SOLUTIONS FOR THE APPLICATION OF HEAT INSULATING PRODUCTS FROM POLYURETHANE FOAM IN THE CONSTRUCTION OF RESIDENTIAL, PUBLIC AND INDUSTRIAL BUILDINGS

Building Materials
  • Year: 2014
  • Issue: 5
  • 41
  • 2519
  • Pages: 71-441

Base’s structure of Prefabricated Sanitary Module: erection and life stages

Building constructions, buildings and structures
  • Year: 2021
  • Issue: 5
  • 66
  • 1572
  • Pages: 9803-9803

The use of polymer composite materials in the creation of promising transport systems in the conditions of the Arctic zone of the Russian Federation

  • Year: 2019
  • Issue: 8
  • 3
  • 1637
  • Pages: 8305-8305

Thermal conductivity of aerogel thermal insulation under stationary thermal conditions

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 5
  • 41
  • 912
  • Pages: 10303-10303

Analytical solution of the problem of flow in a porous rectangular bulkhead

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 7
  • 74
  • 926
  • Pages: 10501-10501

Free vibrations of a viscoelastic isotropic plate with a negative Poisson's ratio

Building constructions, buildings and structures
  • Year: 2022
  • Issue: 7
  • 43
  • 898
  • Pages: 10502-10502

Tensile strength prediction method through compressive concrete cube test

Building Materials
  • Year: 2024
  • Issue: 2
  • 32
  • 362
  • Pages: 11102-11102