.png){kind=logo}
Articles from section "Building Materials"
The effect of photoluminescent powder on the rheological properties of architectural cement composites for 3D printing
- Year: 2026
- Issue: 1
- 7
- 249
- Pages: 12105-12105
Bond strength between concrete and steel rebar in circular sections
- Year: 2026
- Issue: 1
- 10
- 302
- Pages: 12104-12104
Shape memory polymer rods for improving crack resistance in reinforced concrete beams
- Year: 2026
- Issue: 1
- 9
- 373
- Pages: 12102-12102
Method for evaluating self-healing in cement composites via permeability variation analysis
- Year: 2025
- Issue: 6
- 38
- 927
- Pages: 12001-12001
Composite materials based on ash and slag waste for thermal insulation of roadbeds
- Year: 2025
- Issue: 6
- 33
- 998
- Pages: 12002-12002
Influence of carbon nanotubes on the durability and permeability of foam concrete
- Year: 2025
- Issue: 3
- 23
- 1292
- Pages: 11705-11705
The sorption capacity of technical carbon obtained from the thermolysis of tires and mineral wool waste
- Year: 2025
- Issue: 3
- 34
- 2496
- Pages: 11701-11701
Mechanical and microstructural characterization of recycled plastic waste in sustainable building applications
- Year: 2025
- Issue: 1
- 75
- 3723
- Pages: 11506-11506
Gypsum binder α- and β-modifications from byproduct phosphogypsum
- Year: 2024
- Issue: 4
- 17
- 2359
- Pages: 11320-11320
Sensitivity of composite pipe properties to fractal dimensions
- Year: 2024
- Issue: 4
- 23
- 2235
- Pages: 11318-11318
Multifractal modeling for quality control and mechanical property assessment of fiberglass pipes
- Year: 2024
- Issue: 4
- 21
- 2098
- Pages: 11317-11317
Multi-criteria evaluation of glass-basalt composites based on fractal geometry
- Year: 2024
- Issue: 4
- 27
- 2219
- Pages: 11316-11316
Effect of matrix fiber multifractal characteristics on the strength of glass-basalt composite pipes
- Year: 2024
- Issue: 4
- 25
- 2106
- Pages: 11315-11315
Thermomechanical behavior of polymer composites and its calculation with finite element modeling
- Year: 2024
- Issue: 4
- 26
- 2310
- Pages: 11312-11312
Composite building materials based on recycled thermoplastic polymers
- Year: 2024
- Issue: 4
- 32
- 2238
- Pages: 11311-11311
Properties of the urease enzyme as a component of self-healing concrete. A review
- Year: 2024
- Issue: 4
- 27
- 2442
- Pages: 11310-11310
Factors influencing the mechanisms of self-healing of cementing materials. A review
- Year: 2024
- Issue: 4
- 27
- 2539
- Pages: 11309-11309
Tensile strength prediction method through compressive concrete cube test
- Year: 2024
- Issue: 2
- 57
- 3336
- Pages: 11102-11102
Mechanical properties of fiber-reinforced polymer bars under various types of stress-strain state
- Year: 2023
- Issue: 4
- 31
- 2957
- Pages: 10931-10931
Temperature stress accumulation in polymer composite shells under cyclic temperature impact
- Year: 2023
- Issue: 4
- 60
- 3021
- Pages: 10920-10920
Drainage bridge trays made of glass fiber reinforced polymer: physical, mechanical and operational properties
- Year: 2023
- Issue: 4
- 42
- 3112
- Pages: 10919-10919
Strains and strength of reinforced concrete beams manufacturing by high-strength concrete for non-coincident planes of temperature gradient and loading
- Year: 2023
- Issue: 4
- 52
- 3459
- Pages: 10914-10914
Effect of aleuropelite content on fresh and hardened properties of 3D-printable multi-binder composites
- Year: 2023
- Issue: 4
- 38
- 3216
- Pages: 10909-10909
Impact response of steel fiber reinforced concrete beams with hooked fibers
- Year: 2023
- Issue: 4
- 49
- 3069
- Pages: 10903-10903
3D-printable concrete with specific decorative and technological properties
- Year: 2023
- Issue: 3
- 28
- 3081
- Pages: 10805-10805
Interfacial layers in mineral-bitumen composite and durability of asphalt concrete
- Year: 2023
- Issue: 3
- 45
- 3343
- Pages: 10802-10802
Condition Load Effect Factor of Profile Steel in Lightweight Steel Concrete Wall Panels
- Year: 2023
- Issue: 1
- 83
- 3736
- Pages: 10602-10602
Asphalt concrete based on bituminous polysulfide binder, designed according to the volumetric method
- Year: 2022
- Issue: 7
- 47
- 3194
- Pages: 10512-10512
Activated mineral fillers for the modification of cement composites
- Year: 2022
- Issue: 7
- 19
- 3090
- Pages: 10511-10511
Performance characteristics of styrene-acrylic polymer coatings with activated dispersive filler
- Year: 2022
- Issue: 7
- 33
- 3285
- Pages: 10508-10508
Plaster cement dry mixes with a complex organomineral additive
- Year: 2022
- Issue: 7
- 23
- 3547
- Pages: 10505-10505
Self-Healing Concrete Using Fly Ash, Macro Synthetic Fibres and Recycled Aggregates
- Year: 2022
- Issue: 6
- 56
- 3422
- Pages: 10405-10405
Citrogypsum as a Raw Material for Gypsum Binder Production
- Year: 2022
- Issue: 2
- 36
- 3613
- Pages: 10007-10007
Solid particle erosion wear of thermosetting polymers and composites at room and elevated temperatures: an experimental study
- Year: 2021
- Issue: 5
- 65
- 3932
- Pages: 9804-9804
Prediction of elastic characteristics of fiber-reinforced plastic in bending: multi-scale finite element modeling and experiment
- Year: 2021
- Issue: 5
- 83
- 4634
- Pages: 9801-9801
The Influence of Concrete Composition on the Ratio of Strength to Elastic Modulus as a Criterion of Crack Resistance
- Year: 2021
- Issue: 4
- 67
- 4031
- Pages: 9704-9704
Mechanical Characteristics of High-Strength Concrete with Fly Ash and Silica Fume at Elevated Temperatures: The Influence of Heating Duration
- Year: 2021
- Issue: 3
- 65
- 5198
- Pages: 9601-9601
The Effective Reinforcement Ratio of Expanded Clay Concrete by Polypropylene Fiber
- Year: 2020
- Issue: 8
- 57
- 5868
- Pages: 9303-9303
Based on the hybrid hot-curing epoxy binder fiberglass and evaluation of its effectiveness in load-bearing chimneys
- Year: 2020
- Issue: 8
- 101
- 5467
- Pages: 9302-9302
The Stress-Strain State of a Metal Cracked Plate with the Various Types of the Deformation Curve
- Year: 2020
- Issue: 7
- 40
- 4585
- Pages: 9205-9205
Wood Concrete Modified with Ground Granulated Blast Furnace Slag
- Year: 2020
- Issue: 6
- 58
- 4625
- Pages: 9107-9107
Mechanical Properties of Compressed Concrete with Confinement Mesh Reinforcement
- Year: 2020
- Issue: 6
- 46
- 4520
- Pages: 9103-9103
Application of Optical Density in Evaluating Performance of Evolutionary Modified Perlite in Water Reclamation
- Year: 2019
- Issue: 7
- 8
- 4135
- Pages: 14-21
Bending resistance of foam concrete beams reinforced with composite fittings
- Year: 2020
- Issue: 5
- 38
- 4629
- Pages: 9006-9006
Effect of Locust Bean Pod Epicarp Ash (Lbpea) on the Compressive Strength of Revibrated Concrete
- Year: 2020
- Issue: 5
- 48
- 4699
- Pages: 9002-9002
Geotextile-Reinforced Soils in a Modernized Irrigation System
- Year: 2020
- Issue: 3
- 115
- 5309
- Pages: 8805-8805
The Effectiveness of Polymer-Paraffin Emulsions to Reduce Moisture Loss from Hardening Concrete
- Year: 2020
- Issue: 3
- 117
- 5272
- Pages: 8801-8801
Styrene-butadiene-styrene polymers for road construction in the Russian Federation
- Year: 2020
- Issue: 2
- 136
- 5177
- Pages: 23-40
Сeramic granite as a material for suspended ventilated facades
- Year: 2019
- Issue: 5
- 36
- 4774
- Pages: 7-13
Polyfunctional chemical modifier for gypsum cement compositions
- Year: 2018
- Issue: 11
- 29
- 4929
- Pages: 17-25
Actual thermal insulation properties of cellular autoclave curing concretes
- Year: 2018
- Issue: 5
- 56
- 5093
- Pages: 75-104
Fiber-cement compositions modified by flocculating additives
- Year: 2018
- Issue: 10
- 31
- 4650
- Pages: 28-37
Determination of the cost of insulation on their thermophysical characteristics
- Year: 2019
- Issue: 1
- 67
- 5150
- Pages: 19-29
Effect of complex organo-mineral additive on the deformation of hydrotechnical concrete
- Year: 2019
- Issue: 4
- 78
- 5790
- Pages: 7-19
Crack-resistance of the reinforced concrete wall under conditions of temperature deformation constrained by the foundation
- Year: 2018
- Issue: 8
- 37
- 4803
- Pages: 51-62
Cold-bonded fly ash aggregate as a coarse aggregate of concrete
- Year: 2018
- Issue: 9
- 82
- 5556
- Pages: 31-45
Transparent concrete in construction of buildings and structures
- Year: 2015
- Issue: 11
- 30
- 4820
- Pages: 1-14
The most effective crushing equipment and testing of recycled concrete aggregates
- Year: 2015
- Issue: 10
- 25
- 4533
- Pages: 34-45
Thermal characteristics of friable insulation materials depending on the humidity in the example of "Fiberteks"
- Year: 2015
- Issue: 8
- 8
- 4295
- Pages: 60-71
Acceleration of the formation process of the structure of cement stone with the use of carbonnanomodified additives
- Year: 2015
- Issue: 7
- 12
- 4579
- Pages: 32-40
Characteristics of modern types of panels in low-rise building
- Year: 2015
- Issue: 6
- 11
- 4620
- Pages: 62-73
Seminars named after Academician Enikolopov. Nanomaterials: theory and practice
- Year: 2015
- Issue: 4
- 8
- 4609
- Pages: 7-9
Influence of super-plasticizer on workability concrete mix in thehot earthquake-prone regions
- Year: 2014
- Issue: 11
- 13
- 4360
- Pages: 94-106
Experimental comparison of the characteristics of water vapor permeability of the main construction materials
- Year: 2014
- Issue: 10
- 15
- 4385
- Pages: 98-108
Superplasticized technological properties of concrete mixtures
- Year: 2014
- Issue: 6
- 9
- 4574
- Pages: 58-69
Simulation of the temperature field in the sand-lime brick during warm-blank
- Year: 2014
- Issue: 5
- 7
- 4249
- Pages: 65-70
Heat and mass transfer in thermal-treated silica brick with mud additives
- Year: 2014
- Issue: 4
- 9
- 4177
- Pages: 75-82
The economy of use and the impact of nanoparticles on properties of lightweight high-strength concrete
- Year: 2014
- Issue: 4
- 11
- 4605
- Pages: 51-61
A comparative analysis of European and Russian technical documentation of building materials
- Year: 2014
- Issue: 4
- 50
- 4572
- Pages: 34-50
Modeling of thermal processes with use of iron and steel wastes in the production of silica brick
- Year: 2013
- Issue: 8
- 7
- 4293
- Pages: 29-33
Perfomance characteristics of autoclaved aerated concrete with density 400 kg/cub.m
- Year: 2013
- Issue: 5
- 10
- 4257
- Pages: 28-57
Interaction of hydrous dispersed mixtures with the metal surface
- Year: 2013
- Issue: 4
- 5
- 4353
- Pages: 1-17
Acoustic characteristics of foam polypropylene as an example of vibration and sound isolation material Penoterm Penoprof NPP LE
- Year: 2016
- Issue: 2
- 21
- 4816
- Pages: 78-90
Protective properties of anticorrosive coatings of steel thin-walled profiles for walling
- Year: 2017
- Issue: 3
- 12
- 4269
- Pages: 71-79
Strongly reinforced concreting design of cast concrete alloy mixtures
- Year: 2017
- Issue: 2
- 16
- 5594
- Pages: 29-41
Masonry units with high percentage of holes in a facing laying of external walls (as a scientific discussion)
- Year: 2017
- Issue: 1
- 30
- 5116
- Pages: 86-92
The process of increasing the fire resistance of glass with preservation its operational properties
- Year: 2017
- Issue: 1
- 34
- 5137
- Pages: 17-26
Efficiency of applying sustainable technology of bubbledeck technology in concrete in Russia
- Year: 2017
- Issue: 11
- 23
- 4383
- Pages: 83-92